GRC構件突出特點是具有很好的抗拉和抗折強度，以及較好的韌性。在強化特定的建筑設計效果中起著決定性的作用。這也是被引進我國后就被廣泛使用的原因，下面公司給你細數
濟南GRC構件的6大優勢。
GRC members are characterized by good tensile and flexural strength and good toughness. It plays a decisive role in strengthening the specific architectural design effect. This is also the reason why it has been widely used since it was introduced into China. The following company will give you a detailed list of six advantages of Jinan GRC components.
1、可再生、無輻射
1. Environmentally friendly, renewable and radiation-free
GRC構件屬可再生材料，廢舊的構件可以回復再利用，有利于。原材料不含有放射性核元素，為放射性核素含量A類構件材料。
GRC components are renewable materials, and waste components can be recycled, which is beneficial to environmental protection. Raw materials do not contain radionuclides, and are Class A environmental protection component materials with radionuclide content.
2、顏色多樣、造型新穎
2. Various colors and novel shapes
GRC構件采用同質透心礦物原料，可以根據客戶的需求做成各種不同顏色及不同造型的藝術效果。
GRC components are made of homogenous and transparent mineral raw materials, which can be made into artistic effects of different colors and shapes according to customers' needs.
3、質感效果好、肌理多
3. Good texture and texture
GRC產品表面可做成噴砂面、荔枝面、光面等不同質感效果，也可以做成條形、浮雕、鏤空等不同肌理效果。
The surface of GRC products can be made into sandblasted surface, litchi surface, smooth surface and other different texture effects, and can also be made into strip, relief, hollow-out and other different texture effects.
4、超薄技術、尺寸不限
4. Ultra-thin technology, unlimited size
GRC構件板薄可做到5mm，標準寬度為900mm和1200mm，長度不限，滿足運輸條件即可，亦可做成5mm任意厚度，任意尺寸。
The GRC member plate can be as thin as 5mm, the standard width is 900mm and 1200mm, and the length is unlimited, which can meet the transportation conditions. It can also be made into any size from 5mm to any thickness.
5、質量更輕、強度更高
5. Lighter weight and higher strength
GRC構件的體積密度約為1.8-1.9,8mm厚標準GRC板重量僅為15kg、抗彎強度超過34Mpa、抗壓強度超過40Mpa、大大超過標準要求。
The bulk density of GRC members is about 1.8-1.9, and the weight of standard GRC plates with a thickness of 8 mm is only 15 kg, the bending strength exceeds 34 Mpa, and the compressive strength exceeds 40 Mpa, which greatly exceeds the standard requirements.
6、模具澆筑、可塑性高
6. Mold pouring, high plasticity
GRC產品是將原料按相應配比攪拌，在模具內澆筑成型，可生產出造型豐富，質感多樣的產品?？筛鶕蛻艉驮O計師的不同需要，進行任意的藝術造型，實現設計師的設計夢想。
GRC products are made by mixing the raw materials according to the corresponding proportion and pouring them into the mold to produce products with rich shapes and diverse textures. According to the different needs of customers and designers, we can carry out any artistic modeling to realize the design dream of designers.
Our GRC components are all building materials products that meet the factory standards after strict testing during production. Our products are of reliable quality and are recognized by real estate and demand groups. Welcome to call http://www.xinyanse.com order.
